ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
请输入关键词或器件型号    



DS2502-E64
IEEE EUI-64节点地址芯片


  快速浏览     技术文档     定购信息     更多信息     所有内容  
状态
状况:生产中。

概述
完整的数据资料 (PDF, 47kB)
英文 下载数据资料(PDF)下载
The DS2502-E64 is a variant of the DS2502 1024-bit add-only memory. It differs from the standard DS2502 in its custom ROM family code 89H, and the UniqueWare™ identifier 5E7 in place of the upper 12 bits of the standard ROM serialization field. Otherwise, the electrical and logical behavior is identical to that of the DS2502. For technical details please refer to the DS2502 data sheet. The first 32 bytes of the DS2502-E64's EPROM memory contain a globally unique 64-bit node address (EUI-64) and are write-protected. The data structure follows the conventions of UniqueWare devices using default data structure (Figure 1 of data sheet).

The data record starts with a length byte (0CH) and the 4-byte UniqueWare project ID 00001128H. The next eight bytes contain the EUI-64 global identifier (node address), which consists of an incrementing 40-bit extension identifier and the IEEE®-assigned 24-bit company ID value 006035H. A 16-bit CRC ends the data record. The remaining bytes of the 32-byte memory page remain unprogrammed. Neither the 40-bit extension identifier nor the 24-bit company ID are related to the 64-bit ROM registration number, which is distinct from the IEEE standard 1394-1995 node address. The ROM registration number is used to provide a unique address to access the DS2502-E64 when multidropped on a 1-Wire® bus.

关键特性
  • IEEE-approved factory programmed 64-bit node address chip (EUI-64) with 768 bits user-programmable OTP-EPROM communicates with the economy of one signal plus ground
  • Meets the node identification requirements of IEEE standard 1394-1995 (FireWire™)
  • Unique, factory-lasered 64-bit registration number assures absolute traceability because no two parts are alike
  • Built-in multidrop controller ensures compatibility with other 1-Wire products
  • Device is an add-only memory where additional data can be programmed into EPROM without disturbing existing data
  • Reduces control, address, data, power, and programming signals to a single pin
  • Directly connects to a single port pin of a microprocessor and communicates at up to 16.3kbps
  • Low cost TO-92 or TSOC surface mount packages
  • Reads over a wide voltage range of 2.8V to 6.0V from -40°C to +85°C; programs at 11.5V to 12.0V from -40°C to +50°C

Key Specifications:  Memory (EPROM, EEPROM, ROM, NV SRAM)
Part Number Memory Type Memory Size Bus Type Real Time Clock DIP w/Int. Batt. Pwr. Cap Pckg. Battery Monitor With GPIO Features VSUPPLY
(V)
VSUPPLY
(V)
Price
min max See Notes
DS2502-E64  EPROM 1K x 1 1-Wire No No No No No
Add-Only Memory
IEEE EUI-64 Node Address
2.8 6 $1.30 @1k
查看所有Memory (EPROM, EEPROM, ROM, NV SRAM) (52)

图表
DS2502-E64:引脚分配
引脚分配

没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    1999-10-20
    本页最后一次更新: 2009-10-28


            •         •         •     隐私权政策     •     法律声明

        © 2009 Maxim Integrated Products版权所有