ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
请输入关键词或器件型号    



DS1321
灵活的非易失控制器,带有锂电池


  快速浏览     技术文档     定购信息     更多信息     所有内容  
状态
状况:生产中。

数据资料
完整的数据资料 (PDF, 208kB)
英文 下载数据资料(PDF)下载

概述
The DS1321 Flexible Nonvolatile Controller with Lithium Battery Monitor is a CMOS circuit which solves the application problem of converting CMOS SRAMs into nonvolatile memory. Incoming power is monitored for an out-of-tolerance condition. When such a condition is detected, chip enable outputs are inhibited to accomplish write protection and the battery is switched on to supply the SRAMs with uninterrupted power. Special circuitry uses a low-leakage CMOS process which affords precise voltage detection at extremely low battery consumption. One DS1321 can support as many as four SRAMs arranged in any of three memory configurations.

In addition to battery-backup support, the DS1321 performs the important function of monitoring the remaining capacity of the lithium battery and providing a warning before the battery reaches end-of-life. Because the open-circuit voltage of a lithium backup battery remains relatively constant over the majority of its life, accurate battery monitoring requires loaded-battery voltage measurement. The DS1321 performs such measurement by periodically comparing the voltage of the battery as it supports an internal resistive load with a carefully selected reference voltage. If the battery voltage falls below the reference voltage under such conditions, the battery will soon reach end-of-life. As a result, the Battery Warning pin is activated to signal the need for battery replacement.

关键特性
  • Converts CMOS SRAM into nonvolatile memory
  • Unconditionally write-protects SRAM when VCC is out of tolerance
  • Automatically switches to battery backup supply when VCC power failure occurs
  • Flexible memory organization
    • - Mode 0: 4 banks with 1 SRAM each
    • - Mode 1: 2 banks with 2 SRAMs each
    • - Mode 2: 1 bank with 4 SRAMs each
  • Monitors voltage of a lithium cell and provides advanced warning of impending battery failure
  • Signals low-battery condition on active low Battery Warning output signal
  • Resets processor when power failure occurs and holds processor in reset during system power-up
  • Optional 5% or 10% power-fail detection
  • 16-pin DIP, 16-pin SOIC and 20-pin TSSOP packages
  • Industrial temperature range of -40°C to +85°C
  • 通过美国保险商实验室协会(UL®)认证

Key Specifications:  Non-Volatile RAM Controllers
Part Number CE Cntrl. Smart Socket w/Int. Batt. Li Batt. Monitor Pwr. Fail Out RAMs Controlled Reset Out VSUPPLY
(V)
Package/Pins Smallest Available Pckg.
(mm2)
Price
max w/pins See Notes
DS1321  Yes No Yes No 4 Yes 5
PDIP(N)/16
SOIC(N)/16
TSSOP/20
45.2 $4.05 @1k
查看所有Non-Volatile RAM Controllers (13)

图表
DS1321:功能原理框图
功能原理框图

可靠性报告
  • 可靠性报告: DS1321.pdf (English only)
  • 通过美国保险商实验室协会(UL®)认证

    软件/模型

    定购信息
    注:

    1. 购买产品,请访问:http://china.maxim-ic.com/sales
    2. 没有找到您所需要的器件?请咨询我们的应用工程师。我们的专家会帮助您找到合适的器件,通常在一个工作日内回复。
    3. 型号尾缀:T或T&R = 卷带; + = RoHS/无铅; # = RoHS/无铅豁免权。详细信息请参考:完整的数据资料型号命名规则
    4. * “封装代码/变更”提供产品使用的变更信息。注意:型号尾缀中的“+”、“#”和“-”表示器件的RoHS状况,封装图上可能显示不同的尾缀字符。


    器件: 1-10/10

    DS1321 免费样品 采购 状态
    封装: 类型 引脚 占位面积
      封装图编码/变更 *
    温度 RoHS/无铅?
    材料分析
    DS1321    
    Active PDIP(N);16引脚;158.4mm²
    封装图: 21-0043 (PDF)
    连接盘图形: Not Applicable
    使用封装码/变更:P16-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    DS1321+  
    Active PDIP(N);16引脚;158.4mm²
    封装图: 21-0043 (PDF)
    连接盘图形: Not Applicable
    使用封装码/变更:P16+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    DS1321S+T&R    
    Active SOIC(N);16引脚;61.9mm²
    封装图: 21-0041 (PDF)
    连接盘图形: 90-0097 (PDF)
    使用封装码/变更:S16+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    DS1321S    
    Active SOIC(N);16引脚;61.9mm²
    封装图: 21-0041 (PDF)
    连接盘图形: 90-0097 (PDF)
    使用封装码/变更:S16-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    DS1321S/T&R    
    Active SOIC(N);16引脚;61.9mm²
    封装图: 21-0041 (PDF)
    连接盘图形: 90-0097 (PDF)
    使用封装码/变更:S16-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    DS1321S+  
    Active SOIC(N);16引脚;61.9mm²
    封装图: 21-0041 (PDF)
    连接盘图形: 90-0097 (PDF)
    使用封装码/变更:S16+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    DS1321E+T&R    
    Active TSSOP;20引脚;45.2mm²
    封装图: 21-0066 (PDF)
    连接盘图形: 90-0116 (PDF)
    使用封装码/变更:U20+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    DS1321E+  
    Active TSSOP;20引脚;45.2mm²
    封装图: 21-0066 (PDF)
    连接盘图形: 90-0116 (PDF)
    使用封装码/变更:U20+1*
    -40°C至+85°C RoHS/无铅:无铅
    材料分析
    DS1321E    
    Active TSSOP;20引脚;45.2mm²
    封装图: 21-0066 (PDF)
    连接盘图形: 90-0116 (PDF)
    使用封装码/变更:U20-1*
    -40°C至+85°C RoHS/无铅:
    材料分析
    DS1321E/T&R    
    Active TSSOP;20引脚;45.2mm²
    封装图: 21-0066 (PDF)
    连接盘图形: 90-0116 (PDF)
    使用封装码/变更:U20-1*
    -40°C至+85°C RoHS/无铅:
    材料分析

    更多信息
  • UL认证

    相关产品

    类似产品:浏览其它类似产品线

    没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    参考文献: xxxx; 2004-09-15
    本页最后一次更新: 2009-10-23


            •         •         •     隐私权政策     •     法律声明

        © 2009 Maxim Integrated Products版权所有