ENGLISH 简体中文 日本語 한국어  



   
 
请输入关键词或器件型号    



MAX3140
SPI/MICROWIRE兼容的UART,集成真正失效保护的RS-485/RS-422收发器


  快速浏览     技术文档     定购信息     更多信息     所有内容  
状态
状况:生产中。

概述
完整的数据资料 (PDF, 480kB)
英文 下载数据资料(PDF)下载
The MAX3140 is a complete universal asynchronous receiver-transmitter (UART) and a true fail-safe RS-485/RS-422 transceiver combined in a single 28-pin QSOP package for space-, cost-, and power-constrained applications. The MAX3140 saves additional board space as well as microcontroller (µC) I/O pins by featuring an SPI™/QSPI™/MICROWIRE™-compatible serial interface. It is pin-programmable for configuration in all RS-485/RS-422 networks.

The MAX3140 includes a single RS-485/RS-422 driver and receiver featuring true fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This feature provides immunity to faults without requiring complex termination. The MAX3140 provides software-selectable control of half- or full-duplex operation, data rate, slew rate, and transmitter and receiver phase. The RS-485 driver slew rate is programmable to minimize EMI and results in maximum data rates of 115kbps, 500kbps, and 10Mbps. Independent transmitter/receiver phase control enables software correction of twisted-pair polarity reversal. A 1/8-unit-load receiver input impedance allows up to 256 transceivers on the bus.

The MAX3140's UART includes an oscillator circuit derived from an external crystal, and a baud-rate generator with software-programmable divider ratios for all common baud rates from 300 baud to 230k baud. The UART features an 8-word-deep receive FIFO that minimizes processor overhead and provides a flexible interrupt with four maskable sources, including address recognition on 9-bit networks. Two control lines are included for hardware handshaking-one input and one output.

The MAX3140 operates from a single +5V supply and typically consumes only 645µA with the receiver active. Hardware-invoked shutdown reduces supply current to only 20µA. The UART and RS-485/RS-422 functions can be used together or independently since the two functions share only supply and ground connections (the MAX3140 is hardware- and software-compatible with the MAX3100 and MAX3089).

关键特性   应用/使用
  • Integrated UART and RS-485/RS-422 Transceiver in a Single 28-Pin QSOP
  • SPI/MICROWIRE-Compatible Interface Saves µC I/O Pins
  • True Fail-Safe Receiver Output Eliminates Complex Network Termination
  • Pin-Programmable RS-485/RS-422 Features
    • Half/Full-Duplex Operation
    • Slew-Rate Limiting for Reduced EMI
    • 115kbps/500kbps/10Mbps Data Rates
    • Receiver/Transmitter Phase for Twisted-PairPolarity Reversal
  • Full-Featured UART
    • Programmable Up to 230k baud with a 3.6864MHz Crystal
    • 8-Word Receive FIFO Minimizes Processor Overhead
    • 9-Bit Address-Recognition Interrupt
  • Allows Up to 256 Transceivers on the Bus
  • Low 20µA Hardware Shutdown Mode
  • Hardware/Software-Compatible with MAX3100 and MAX3089

 
  • 嵌入式系统
  • HVAC与楼宇控制
  • 工业控制局域网
  • 智能仪表
  • 销售终端机(POS)设备
  • 用于EMI敏感应用的收发器

    Key Specifications:  SPI/Microwire-Compatible UARTs
    Part Number µP I/F ICC
    (mA)
    VSUPPLY
    (V)
    Package/Pins Smallest Available Pckg.
    (mm2)
    Oper. Temp.
    (°C)
    Price
    typ max w/pins See Notes
    MAX3140  SPI and Microwire Compatible 0.7 5
    QSOP/28
    62
    -40 to +85
    0 to +70
    $4.07 @1k
    查看所有SPI/Microwire-Compatible UARTs (4)

    图表
    MAX3140:典型应用电路
    典型应用电路

    没有找到你需要的产品吗?
  • 应用工程师帮助选型,下个工作日回复
  • 参数搜索
  • 应用帮助
  •  快速浏览   技术文档   定购信息   更多信息  
     概述 
     关键特性 
     应用/使用 
     关键指标 
     图表 

     数据资料 
     应用笔记 
     设计指南 
     工程期刊 
     可靠性报告 
     软件/模型 
     评估板 

     价格与供货 
     样品 
     在线订购 
     封装信息 
     无铅信息 

     相关产品 
     注释、注解 
     评估板 

    参考文献: 19-1453; Rev. 0; 1999-06-01
    本页最后一次更新: 2008-03-07


            •         •         •     隐私权政策     •     法律声明

        © 2009 Maxim Integrated Products版权所有