The MAX4174/MAX4175/MAX4274/MAX4275 GainAmp family combines a low-cost rail-to-rail op amp with precision internal gain-setting resistors and VCC/2 biasing. Factory-trimmed on-chip resistors decrease design size, cost, and layout, and provide 0.1% gain accuracy. Fixed inverting gains from -0.25V/V to -100V/V or noninverting gains from +1.25V/V to +101V/V are available. These devices operate from a single +2.5V to +5.5V supply and consume only 300µA. GainAmp amplifiers are optimally compensated for each gain version, achieving exceptional GBW products up to 23MHz (AV = +25V/V to +101V/V). High-voltage fault protection withstands µ17V at either input without excessive current draw.
Three versions are available in this amplifier family: single/dual/quad open-loop, unity-gain stable (MAX4281/MAX4282/MAX4284); single/dual fixed gain (MAX4174/MAX4274); and single/dual fixed gain plus internal VCC/2 bias at the noninverting input (MAX4175/MAX4275), which simplifies input biasing in single-supply designs. The input common-mode voltage range of the open-loop amplifiers extends from 150mV below the negative supply to within 1.2V of the positive supply. The outputs can swing rail-to-rail and drive a 1kΩ load while maintaining excellent DC accuracy. The amplifier is stable for capacitive loads up to 470pF.
关键特性
应用/使用
GainAmp Family Provides Internal Precision Gain-Setting Resistors in SOT23 (MAX4174/5)
0.1% Gain Accuracy (RF/RG) (MAX4174/5, MAX4274/5)
54 Standard Gains Available (MAX4174/5, MAX4274/5)
Open-Loop Unity-Gain-Stable Op Amps (MAX4281/2/4)
Rail-to-Rail Outputs Drive 1kΩ Load
Internal VCC/2 Biasing (MAX4175/MAX4275)
+2.5V to +5.5V Single Supply
300µA Supply Current
Up to 23MHz GBW Product
Fault-Protected Inputs Withstand ±17V
Stable with Capacitive Loads Up to 470pF with No Isolation Resistor
下载