The MAX148/MAX149 10-bit data-acquisition systems combine an 8-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption. They operate from a single +2.7V to +5.25V supply, and sample to 133ksps. Both devices' analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation.
The 4-wire serial interface connects directly to SPI™/QSPI™ and MICROWIRE™ devices without external logic. A serial-strobe output allows direct connection to TMS320-family digital signal processors. The MAX148/MAX149 use either the internal clock or an external serial-interface clock to perform successive-approximation analog-to-digital conversions.
The MAX149 has an internal 2.5V reference, while the MAX148 requires an external reference. Both parts have a reference-buffer amplifier with a ±1.5% voltage-adjustment range.
These devices provide a hard-wired active-low SHDN pin and a software-selectable power-down, and can be programmed to automatically shut down at the end of a conversion. Accessing the serial interface automatically powers up the MAX148/MAX149, and the quick turn-on time allows them to be shut down between all conversions. This technique can cut supply current to under
60µA at reduced sampling rates.
The MAX148/MAX149 are available in a 20-pin DIP and a 20-pin SSOP.
For 4-channel versions of these devices, see the MAX1248/MAX1249 data sheet.
关键特性
应用/使用
8-Channel Single-Ended or 4-Channel Differential Inputs
Single-Supply Operation: +2.7V to +5.25V
Internal 2.5V Reference (MAX149)
Low Power:
1.2mA (133ksps, 3V Supply)
54µA (1ksps, 3V Supply)
1µA (Power-Down Mode)
SPI/QSPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface
下载
