ENGLISH 简体中文 日本語 한국어  



   
 
请输入关键词或器件型号    



应用笔记

  • 我们的工程师撰写了2000篇以上的应用笔记和技术文章,为其他工程师提供支持。
  • 您可以对任何一篇应用笔记发表评论,与工程师分享您的观点。
  • 这些文章包括专家的分析和设计思路,并提供有参考设计和设计指南,使您的设计更专业。
  按类别选择     按型号选择     技术讲座     参考设计     工程期刊     最新应用笔记  

电池管理

打开新页面 App Note 4406  摘要
Power Supply Features Low VIN and VOUT


打开新页面 App Note 4410  摘要
Battery Backup with Delay


打开新页面 应用笔记3906  摘要
用两个单向电流检测放大器组成一个双向电流检测放大器


打开新页面 App Note 3741  摘要
Analog ICs for Low Voltage Systems


打开新页面 应用笔记3227  摘要
上电复位与相关监控功能


打开新页面 应用笔记2989  摘要
根据应用合理选择电池


打开新页面 应用笔记3166  摘要
电源内阻:扼杀DC-DC转换效率的元凶


打开新页面 应用笔记2879  摘要
选择最佳的电压基准源


打开新页面 应用笔记2412  摘要
获取电量计应用中的锂电池特性


打开新页面 App Note 2011  摘要
High-Side Positive Current Sensor Monitors Negative Supply


打开新页面 App Note 1987  摘要
Auto-Retry Controller Suits Telecom Applications


打开新页面 App Note 1872  摘要
Low-Battery Indicator Is Low Cost, Highly Efficient, and Environmentally Friendly


打开新页面 App Note 165  摘要
Interfacing the DS2760 1-Wire High-Precision Li-Ion Battery Monitor and Protection IC in a Microcontroller Environment


打开新页面 App Note 905  摘要
Adding POR Function to the MAX1864 Generating Two Outputs


打开新页面 应用笔记120  摘要
利用API控制DS1WM 1-Wire®总线主机


打开新页面 应用笔记956  摘要
利用模拟开关降低继电器的功耗


打开新页面 App Note 912  摘要
Turn-On Switching Loss of An Asynchronous Buck Converter


打开新页面 App Note 909  摘要
The MAX1802 for Digital Still Camera from 2AA Batteries


打开新页面 App Note 906  摘要
The MAX1864 Generates 1.2V or Lower Output Voltage


打开新页面 App Note 891  摘要
Dual 1.4MHz Synchronous Buck Regulator Supports USB Dying Gasp Applications


打开新页面 App Note 718  摘要
Properties of the Charge-Pump Voltage Splitter


打开新页面 App Note 850  摘要
Flyback Circuit Powers Broadband Phone Networks


打开新页面 App Note 842  摘要
Mathcad Calculates Input Capacitor for Step-Down Buck Regulator


打开新页面 App Note 669  摘要
Charge Pumps Shine in Portable Designs


打开新页面 App Note 662  摘要
Power Conservation in 3V/5V Dual-Supply Systems


打开新页面 App Note 660  摘要
Regulator Topologies For Battery-Powered Systems


打开新页面 App Note 665  摘要
Flyback Converter Serves Battery-Powered CCD Applications


打开新页面 App Note 636  摘要
Reverse-Current Circuitry Protection


打开新页面 App Note 666  摘要
Versatile ICs Enable Chemistry-Independent Battery Charging


打开新页面 App Note 652  摘要
Synchronous Rectification Aids Low-Voltage Power Supplies


打开新页面 App Note 658  摘要
Ultra-Thin DC-DC Converters Suit Compact PCMCIA Cards


打开新页面 App Note 667  摘要
Power Efficiency in Next-Generation CPUs Tied to MOSFET Choice


打开新页面 App Note 663  摘要
Proper Handling Helps Make the Most of Li-Ion Batteries


打开新页面 App Note 668  摘要
Managing Noise in Cell-Phone Handsets


打开新页面 App Note 664  摘要
Feedback Isolation Augments Power-Supply Safety and Performance


打开新页面 App Note 653  摘要
Circuit Tradeoffs Minimize Noise in Battery-Input Power Supplies


打开新页面 App Note 715  摘要
A Smart Solid-State Fuse Cures Boost-Converter Ills


打开新页面 应用笔记675  摘要
便携式CPU内核的供电问题


打开新页面 App Note 674  摘要
Push-Pull Driver Provides Isolated 5V at 1A


打开新页面 App Note 657  摘要
Simple Circuit Disconnects Load


打开新页面 App Note 1763  摘要
Dual-Voltage Supply Powers SIM Card


打开新页面 App Note 690  摘要
High-Voltage PWM Controller Yields Small, Efficient Telecom/Datacom Supplies


打开新页面 App Note 670  摘要
Power-Supply IC Accommodates Dual-Voltage Portable Systems


打开新页面 App Note 676  摘要
New Developments in Battery Chargers


打开新页面 App Note 671  摘要
Energy Management for Small Portable Systems


打开新页面 App Note 10  摘要
Lower Operating Frequency Improves ICL7660 Voltage-Conversion Efficiency


打开新页面 App Note 35  摘要
Regulated Charge Pump Delivers 50mA


打开新页面 App Note 28  摘要
Low-Power DC-DC Converter Derives 5V From 3V Battery


打开新页面 App Note 515  摘要
Dual Boost Regulator Handles Heavy Surge Currents


打开新页面 App Note 1  摘要
MOSFET Pass Element Yields 100mV-Dropout Regulator


打开新页面 App Note 924  摘要
Step-Up Supply Charges Battery While Serving Load


打开新页面 应用笔记2563  摘要
锂离子电池保护电路


打开新页面 应用笔记2564  摘要
结构紧凑的Li+电池充电器


打开新页面 应用笔记2606  摘要
步升型电源在为负载供电的同时也为电池充电


打开新页面 应用笔记2633  摘要
Nicd电池充电器


打开新页面 应用笔记1653  摘要
高压PWM控制器实现小巧、高效的电信/数据通信电源


打开新页面 应用笔记1654  摘要
蜂窝式手机中的噪声控制


打开新页面 应用笔记2565  摘要
一种简单的断开负载电路


打开新页面 应用笔记2674  摘要
无需电感的稳压型LCD偏置电路


打开新页面 应用笔记2571  摘要
电信应用中提供25W功率的隔离转换器


打开新页面 应用笔记2634  摘要
附加电路在充电之前对电池进行预处理


打开新页面 应用笔记2672  摘要
由太阳能电池获得5V电源


打开新页面 应用笔记2673  摘要
用升压控制器驱动的降压型转换器


打开新页面 应用笔记2642  摘要
三输入电源为3.3V便携式设备供电


打开新页面 应用笔记2631  摘要
从PCI总线的-12V电压获得3.3V电压


打开新页面 应用笔记2655  摘要
用结构紧凑的、高效电荷泵电路提供局部双电源供电


打开新页面 应用笔记2656  摘要
在DC-DC变换器中增加可调的限流功能


打开新页面 应用笔记2661  摘要
控制双向开关的变压器驱动IC


打开新页面 应用笔记2664  摘要
用MAX847构成双向寻呼系统的电源管理方案


打开新页面 应用笔记2669  摘要
高效电荷泵,将5V电压转换为3.3V


打开新页面 应用笔记2670  摘要
线性稳压器控制双输出电荷泵,获得稳定的+/-电源输出



电池充电器
打开新页面 应用笔记4322  摘要
简化锂离子(Li+)电池充电器测试


打开新页面 应用笔记4215  摘要
估算DS2712 NiMH电池充电器的开关速度


打开新页面 应用笔记4214  摘要
估算DS2715 NiMH电池充电器的开关速度


打开新页面 应用笔记4181  摘要
简化1节Li+电池供电设备的设计


打开新页面 App Note 4169  摘要
Understanding Li+ Battery Operation Lessens Charging Safety Concerns


打开新页面 应用笔记3999  摘要
充电电池和单机快速充电器概述


打开新页面 应用笔记3959  摘要
nMOS晶体管与DS2714的配合使用


打开新页面 App Note 3841  摘要
Improving Accuracy of the MAX1737 Lithium-Ion Battery Charger


打开新页面 应用笔记3607  摘要
用USB为电池充电


打开新页面 App Note 3623  摘要
Battery-Charger PWM Input Has Watchdog Protection


打开新页面 应用笔记3501  摘要
可充电电池:原理,隐患,及安全充电方法


打开新页面 应用笔记3388  摘要
用DS2711/12检测原电池


打开新页面 App Note 1815  摘要
Add Current Boost to USB Charger Driven by an AC Adapter


打开新页面 应用笔记960  摘要
从USB端口为便携式设备提供+5V和+3.3V电源


打开新页面 应用笔记716  摘要
正确的布局和元件选择是控制EMI的关键


打开新页面 App Note 913  摘要
Switch-Mode, Linear, and Pulse Charging Techniques for Li+ Battery in Mobile Phones and PDAs


打开新页面 App Note 680  摘要
How to Design Battery Charger Applications that Require External Microcontrollers and Related System-Level Issues


打开新页面 App Note 1014  摘要
Design Case Study: Designing a Power Supply for a Portable, Wireless Contact Manager


打开新页面 App Note 967  摘要
How to Minimize Power Dissipation in Li+ Linear Chargers


打开新页面 App Note 897  摘要
Single-Cell Li+ Cradle Charger With A Linear AC Adapter


打开新页面 App Note 908  摘要
Ultra-Low Resistance Surface Mount Current Shunts


打开新页面 App Note 721  摘要
Portable Devices Need High-Performance Battery Chargers


打开新页面 App Note 936  摘要
Add-On Circuit Preconditions Battery before Charging


打开新页面 App Note 621  摘要
Simple Circuit Charges Lead-Acid Batteries


打开新页面 App Note 981  摘要
Choices for Battery-Charging System Architecture


打开新页面 App Note 344  摘要
Input Current Limiting in Battery Chargers for Mobile Computing Applications


打开新页面 App Note 484  摘要
Harnessing Solar Power with Smart Power-Conversion Techniques


打开新页面 App Note 476  摘要
Comparing the I²C Bus to the SMBus


打开新页面 应用笔记179  摘要
升压/降压型电流源对电池充电


打开新页面 App Note 414  摘要
Battery Charger Regulates Input Voltage


打开新页面 App Note 523  摘要
Quick-Charge IC Routes Step-Up Switcher Output To Battery


打开新页面 App Note 426  摘要
One-Hour Battery Charger Has Switch-Mode PWM Control


打开新页面 App Note 113  摘要
Boost DC-DC Voltage Regulator Converts To Current Source for Battery Charging


打开新页面 App Note 149  摘要
Battery Charger Indicates Trickle Or Fast Charge


打开新页面 应用笔记851  摘要
电池充电器以大于96%的效率提供2.5A电流


打开新页面 App Note 543  摘要
Switch-Mode Supply Charges Battery While Serving Load


打开新页面 应用笔记3774  摘要
升/降压锂池充电设计



电池保护
打开新页面 应用笔记4349  摘要
利用DS2726在充电器反接时保护Li+电池


打开新页面 应用笔记4219  摘要
充电器反接时,DS2784高边nFET保护器的保护电路


打开新页面 App Note 4169  摘要
Understanding Li+ Battery Operation Lessens Charging Safety Concerns


打开新页面 应用笔记4062  摘要
理解DS2784的欠压保护延时(tUVD)


打开新页面 App Note 3744  摘要
Circuit Enables Single NiMH Cell to Simulate a Lithium Battery


打开新页面 应用笔记3501  摘要
可充电电池:原理,隐患,及安全充电方法


打开新页面 App Note 3225  摘要
Waking up a DS2761/DS2762


打开新页面 应用笔记3064  摘要
DS2761的上电状态


打开新页面 应用笔记3065  摘要
DS2762的上电状态


打开新页面 应用笔记2420  摘要
与Microchip PICmicro微控制器之间的1-Wire通信


打开新页面 App Note 2012  摘要
MOSFET Driver Is Reverse-Battery Protected


打开新页面 App Note 2015  摘要
Overcurrent/Overdischarge Protection for Lead-Acid Batteries


打开新页面 App Note 224  摘要
Calibrating the Offset Register of the DS2761


打开新页面 App Note 221  摘要
DS276x Product Comparison


打开新页面 App Note 908  摘要
Ultra-Low Resistance Surface Mount Current Shunts


打开新页面 App Note 128  摘要
Testing and Calibrating a DS2760 Li-Ion Battery Monitor and Protector Based Circuit


打开新页面 应用笔记480  摘要
实现电池反接保护的电路


打开新页面 App Note 968  摘要
Load-Disconnect Switch Consumes Only 8µA



电池选择器
打开新页面 App Note 3889  摘要
Using the DS2746 to Identify a Battery-Pack Based on an Identification Resistor


打开新页面 App Note 3864  摘要
The FET-OR Connection for Power Supplies


打开新页面 App Note 143  摘要
Multiple Battery Pack Applications Using the DS2760 or DS2761



电量计电路
打开新页面 应用笔记4224  摘要
DS2786电池电量计在2节电池供电系统主机侧的使用


打开新页面 应用笔记4189  摘要
获取锂离子(Li+)电池参数,用于基于开路电压(OCV)的电量计测量


打开新页面 应用笔记4141  摘要
基于DS2786电路的编程及测试


打开新页面 应用笔记4106  摘要
DS2786电池电量计在2节锂离子电池包中的使用


打开新页面 应用笔记4062  摘要
理解DS2784的欠压保护延时(tUVD)


打开新页面 应用笔记3992  摘要
基于开路电压(OCV)的电量计DS2786


打开新页面 应用笔记3978  摘要
DS2786K入门


打开新页面 应用笔记3958  摘要
电池电量计:以精度制胜


打开新页面 App Note 3874  摘要
Simple Characterization Circuit for Rechargeable AA Cells


打开新页面 App Note 3889  摘要
Using the DS2746 to Identify a Battery-Pack Based on an Identification Resistor


打开新页面 App Note 3463  摘要
Getting Started with the DS2780


打开新页面 应用笔记3407  摘要
从DS2761升级到DS2762


打开新页面 应用笔记3406  摘要
合理的DS2780线路板布局降低电流测量失调误差


打开新页面 App Note 3225  摘要
Waking up a DS2761/DS2762


打开新页面 应用笔记3092  摘要
DS2740U应用电路替代方案可减小电流的测量偏差


打开新页面 应用笔记2416  摘要
DS27xx电量计电路板布局技巧,实现测量误差最小化


打开新页面 应用笔记2420  摘要
与Microchip PICmicro微控制器之间的1-Wire通信


打开新页面 App Note 2096  摘要
DS2740 High-Precision Coulomb Counter Reference Design


打开新页面 App Note 2046  摘要
Using the DS2751 Battery Fuel Gauge in Multiple-Cell Battery Pack Applications


打开新页面 App Note 1949  摘要
Bi-directional Current-Sense with Single Output


打开新页面 App Note 1919  摘要
Increasing the Fuel Gauge Dynamic Range


打开新页面 App Note 231  摘要
Compensating for Sense Resistor Self Heating


打开新页面 App Note 1798  摘要
Frequency Undersampling in Coulomb-Counting: Measuring Current Flow in Battery Applications


打开新页面 App Note 224  摘要
Calibrating the Offset Register of the DS2761


打开新页面 App Note 527  摘要
Simple Circuit Measures Battery Drain


打开新页面 App Note 221  摘要
DS276x Product Comparison


打开新页面 App Note 121  摘要
Inaccuracies of Estimating Remaining Cell Capacity with Voltage Measurements Alone


打开新页面 App Note 908  摘要
Ultra-Low Resistance Surface Mount Current Shunts


打开新页面 App Note 128  摘要
Testing and Calibrating a DS2760 Li-Ion Battery Monitor and Protector Based Circuit


打开新页面 App Note 123  摘要
Recommended ESD Protection and Circuit Placement for the DS2438 in Li-Ion Cell Pack Master


打开新页面 App Note 138  摘要
Using the DS2760 or DS2761 Battery Monitor in Multiple-Cell Applications


打开新页面 App Note 131  摘要
Lithium-Ion Cell Fuel Gauging with Maxim Battery Monitor ICs


打开新页面 App Note 476  摘要
Comparing the I²C Bus to the SMBus


打开新页面 App Note 485  摘要
Evaluating Accuracy of Coulomb-Counting Fuel-Gauging Systems



通用产品
打开新页面 App Note 3889  摘要
Using the DS2746 to Identify a Battery-Pack Based on an Identification Resistor


打开新页面 App Note 2237  摘要
Simple Circuit Disconnects Load from Low-Voltage Supply


打开新页面 App Note 1930  摘要
Technology Changes: From a Portable Power Point of View


打开新页面 App Note 1793  摘要
Lithium Coin-Cell Batteries: Predicting An Application Lifetime


打开新页面 App Note 527  摘要
Simple Circuit Measures Battery Drain


打开新页面 App Note 714  摘要
Isolated Power Supplies for Telecom Applications


打开新页面 App Note 1083  摘要
Life with Batteries - Don't Ignore Typical Specs


打开新页面 App Note 197  摘要
Sense Resistor Power Dissipation


打开新页面 应用笔记187  摘要
1-Wire搜索算法


打开新页面 应用笔记119  摘要
在FPGA或ASIC中嵌入1-Wire®主机


打开新页面 App Note 145  摘要
Interfacing the 1-Wire Master (DS1WM) to an ARM7 Processor


打开新页面 App Note 124  摘要
Battery Considerations for Today's Low-Power, Long-Life Solid State Devices


打开新页面 App Note 125  摘要
Using Dallas Battery Management ICs with High Voltage Battery Packs


打开新页面 App Note 122  摘要
Using Dallas' 1-Wire ICs in 1-Cell Li-Ion Battery Packs With Low-Side N-Channel Safety FETs Master


打开新页面 应用笔记27  摘要
理解和运用Maxim iButton产品中的循环冗余校验(CRC)


打开新页面 App Note 1000  摘要
Battery-Switchover Circuit Accommodates 3V Systems



返回分类索引

信息更新通知
最先获得新出版的应用笔记,请订阅每周更新的EE-Mail™ – 应用笔记 (English only)。
        •         •         •     隐私权政策     •     法律声明

    © 2009 Maxim Integrated Products版权所有