Though the step-down regulator of Figure 1 normally converts a negative voltage to a lower negative voltage, this circuit's ground reference allows the output to be positive. The configuration works only if the battery terminals can float-a requirement that generally excludes systems in which multiple supply voltages are derived from the same battery. Figure 1. A floating battery allows this negative buck regulator to produce a positive (5V) output. Transistor Q1 translates the 5V feedback signal down to the level of CC (1.23V above the negative input voltage). The circuit's power switching transistor is on the low side rather than the high side, giving it an advantage over conventional buck regulators. N-channel power transistors are preferred in this application, and the low-side connection makes them easier to drive. (The MAX752 in this circuit, operating with an internal n-channel MOSFET, provides the same performance as a MAX738 with its equivalent but larger and more expensive p-channel MOSFET. The Figure 1 circuit supplies 500mA at 5V with excellent efficiency at higher currents (Figure 2). Quiescent supply current is 1.5mA, and the input-voltage range is -6V to -15V. The chip's 170kHz fixed-frequency oscillator allows small external components, and its current-mode PWM control provides precise regulation with low subharmonic noise. Figure 2. Efficiency for the Figure 1 circuit increases with load current. 相关型号   APP 551: Jul 09, 1998 MAX752 5V、升压型、电流模式PWM DC-DC转换器 完整的数据资料 (PDF, 504kB) 自动更新 需要自动接收最新发布的应用笔记吗？请订阅EE-Mail™ (English only)。 我们期待您的反馈！ 喜欢？不喜欢？有待改善？或为我们提供建议？请与我们联系 — 我们将根据您的意见或建议改善我们的工作。 网页评价或提供建议   下载，PDF格式 (24kB)  AN551, AN 551, APP551, Appnote551, Appnote 551